V12F

! En étude pour un ajout dans notre catalogue !

 
  • Design:3.5-way vented-box
  • Frequency Response:22Hz-40kHz
  • Sensitivity (2.83V/1m):88dB
  • Impedance:8 ohms(minimum 6.4 ohms)
  • Power Requirement:50-250W recommended
  • Tweeter:Model:APR1.0. Sandwich aluminum ribbon tweeter, the size of aluminum  ribbon(LWT): 150mm×14.5mm×0.015mm. High power handling, shielded design,
    easily field-replaceable for the ribbon.
  • Rear Firing TweeterModel: G2Si. G2Si. Purified aluminum ribbon tweeter, the size of aluminum ribbon (LWT):60mm×8.5mm×0.01mm. High power handling, high output, shielded design, easily field-replaceable for the ribbon.
  • Midrange:Model:AC165/DC50SC-Y25-0604A, 1×165mm (6.5″). Aluminum frame,  the sandwich cone of Non-woven carbon fiber+Cell+Non-woven carbon fiber, 50mm (2″) copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil, 120mm×20mm Y25 Ferrite magnet.
  • Woofer:Model:AC300/DC75C2C-1204A1, 1×300mm (12″). Aluminum frame, the sandwich cone of Non-woven carbon fiber+Cell+Non-woven carbon fiber, 75mm (3″) copper clad aluminum voice coil with flat wire, the special magnet system with Faraday ring and demodulation coil, 170mm×22mm Y30 Ferrite magnet.
  • Crossover Frequency:170Hz, 1.5kHz and 9kHz
  • Crossover’s Attenuation Slope:Woofer -12dB,Midrange:-12dB,Tweeter -18dB, Rear firing tweeter -12dB.
  • Crossover Components:M-cap Supreme MKP capacitors are used for crossover of tweeter, M-cap MKP capacitors are used for crossover of midrange, and Aurum Cantus MKP capacitors are used for crossover of woofer. Also, a zero ohm inductor and the metal oxide film resistors with military industrial standard.
  • Connective Cable:Teflon insulated OCC cable
  • Damping Material:Wool, polyester fiber and the PU foam
  • Connections:4 pcs 18mm gold-plated copper connector, Bi-wiring.
  • Cabinet Material:High quality MDF
  • FinishThe standard finish is Rosewood PE high gloss paint. Furthermore, there are also
  • Figured maple PE high gloss paint, Cherry PE high gloss paint and the Black PE high gloss paint for options.
  • Dimensions (HWD)1115mm×398mm×557mm(43.90″×15.7″×21.9″).
  • Net Weight:75kgs/pc (165lb/pc)

Importateur & Distributeur officiel de la marque Aurum Cantus Vente-Pose-Installation